Imagine after the completion of a multi -storey sewage work, the sewage plumbing map suddenly changes and one toilet is to be added to each unit. In this case, it is definitely necessary to get a branch of the main sewage pipe for each unit.
a way to branch is to use three ways, but it is not always possible to use three ways. For example, if we intend to get a duct from a building that has little space, it is usually a difficult process to install simple roads.
What is a divorce?
is a kind of sewage connection that is very similar to the sewage. This connection is mostly repaired, and it is to get a sewage division of the previously worked. The difference between the appearance of the divorce and the road can be stated that it is actually a three -way divorce that is cut back.
What are the types of divisions?
Depending on the angle of the branch, there are different divisions, the most important of which are 45 degrees and 90 degrees.
Why do I use a divorce?
As mentioned above, the divorce is used to get a branch. We can say that wherever we need a new branch and for whatever reason we cannot use three ways, we have to use the division. The reason for using a division is the comfort and speed of the work. In the past, some plumbs were manually cut by cutting off three ways, and although it was not standard, it would do the job most of the time.
What is the installation of the divorce?
To install the divorce we need to create a cut in the middle of the pipe we want to disintegrate by other appropriate rounds. We then impregnate the cut and all the places where the dinner tube contacts with the pipe. After that, attach the dipper to the pipe and wait for the pipe to be created between the tube and the cold weld.